|
Non-Woven Polyester Fabric |
WonderPaint's Non-Woven Polyester is a spun-bond, high performance fabric for use in cold applied built-up roofing and roof maintenance systems. It is also applicable for a wide range of other uses including reinforcing concrete overlay systems and agricultural uses.
WonderPaint's Non-Woven Polyester is white to off white with lay lines for one and two ply roof systems. It is ideal as the reinforcing component in cold process roofing and repair using either water-based asphalt or acrylic emulsions, or solvent type coatings or mastics.
In properties required for roofing systems - tear strength, puncture resistance, and tensil strength combined with elongation - WonderPaint's Non-Woven Polyester has been shown in tests to be far superior to conventional roofing felts weighing five to seven times as much as WonderPaint's Non-Woven Polyester.
WonderPaint's Non-Woven Polyester is a polyester that will readily conform to irregular surfaces and standing seam metal roof decks. It is also much easier to handle and apply properly than other soft polyester sheets. It is very stable, resistant to moisture, and doesn't stretch. It is easy to cut and doesn't ravel or produce dust.
Rolls are 25 lbs. except for the light-weight Scrim which comes in 25 or 15 lb rolls.
All material is 36 inches ( .9144 M ) in width.
2.066 oz/sq.yds = 193.6 sq.yds per roll 2.48 oz/sq.meters = 161.3 sq.meters per roll Cost per roll $209.09 = $.12/sq.ft.
1.176 oz/sq.yds = 340 sq.yds per roll 1.411 oz/sq.meters = 283.5 sq.meters per roll Cost per roll $278.46 = $.091/sq.ft.
0.5 oz/sq.yds = 800 sq.yds per 25 lb. roll 0.6 oz/sq.meters = 667 sq.meters per 25 lb. roll 0.5 oz/sq.yds = 480 sq.yds per 15 lb. roll 0.6 oz/sq.meters = 400 sq.meters per 15 lb. roll Cost per 25 lb. roll $331.20 = 4.6 cents/sq.ft. Cost per 15 lb. roll $198.72 = 4.6 cents/sq.ft.
The technical specifications on the above spun-bond polyester fabrics is available on the Data Sheet. These products are comparable replacements for Reemay® product codes #2024 #2016 #2055.
Polyester fabric is not regulated under, and a MSDS is not required for polyester fabric by the OSHA Hazard Communication Standard (29 CFR 1910.1200) because, when used as recommended or under ordinary conditions, it should not present a health and safety hazard. For those that really want one there is a MSDS available here.
We also have available several filter grades of spun-bond fabrics. If you'd like to explore saving money in your filter manufacturing process please contact us with your fabric specifications.
| Page Navigator | Site Search | ||||
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
 May 13, 2008 |
 Tell a Friend! |